Mission-Critical Facility Security Systems & High-Security Integration
Engineering high-availability physical security, NERC CIP-014 substation compliance, and redundant N+1 access control for utilities and critical infrastructure across Georgia.
Stealth Video Systems provides mission-critical physical security, N+1 failover VMS platforms, biometric access control, and NERC CIP-compliant perimeter defense across Georgia since 1998.
What Does Stealth Video Do?
Direct Answer: Stealth Video Systems is an enterprise low-voltage security contractor in Metro Atlanta specializing in mission-critical facility security systems & high-security integration. We engineer turnkey 4K CCTV surveillance, OSDP keyless access control, and fiber optic cabling using 100% direct W-2 bonded technicians with zero subcontractors and guaranteed 4-hour emergency SLA dispatch.
Stealth Video Systems designs and deploys high-availability physical security systems, perimeter thermal radar, and redundant low-voltage networks for electric utility substations, telecommunications switching centers, and water treatment plants across Georgia.
Our engineering team specializes in NERC CIP-014 compliant physical security architectures. We integrate dual-redundant power supplies, fault-tolerant network topologies with automated failover, fiber optic perimeter intrusion detection sensors (PIDS), and automated vehicle access gates and perimeter surveillance.
Who Is This For?
Built for utility substation security managers, telecommunications infrastructure vice presidents, critical infrastructure security officers, and risk directors.
Whether protecting an electric power substation in Metro Atlanta, a regional water distribution facility in Cherokee County, or a carrier-neutral telecom interchange in Cobb County, our systems ensure continuous operational uptime, withstand physical attack, and meet strict federal reliability standards.
Critical Operational Problems We Solve
Common security, liability, and infrastructure challenges faced by commercial properties and how our systems eliminate them:
Physical Sabotage & Rifle Attacks on Power Grid Transformers
Substation transformers face severe rifle attack and physical sabotage risks. We engineer thermal imaging cameras, long-range acoustic sensors, and heavy-duty vandal-resistant IK10 camera housings that detect and track armed intruders outside fence perimeters.
NERC CIP-014 Physical Security Regulatory Fines
Electric utilities face severe daily fines for physical security deficiencies. We design multi-layered physical defense topologies—including automated access gates, dual-verification access, and continuous perimeter monitoring—strictly aligned with NERC CIP-014 mandates.
System Downtime from Single-Point Network or Power Failures
Security outages during grid emergencies leave facilities completely unprotected. We deploy N+1 redundant VMS recording servers, dual-path fiber ring networks, and industrial DC battery backup systems with 24+ hour reserve capacity.
Copper Theft and Trespassing in Remote Generator Yards
Remote critical assets suffer costly wire theft and vandalism. Our AI ground radar and long-range pan-tilt-zoom cameras automatically track trespassers and trigger automated 120dB voice warnings before fences are breached.
Severe Lightning Strikes and Electrical Ground Surges
High-voltage substation switchyards experience massive ground potential rise (GPR) and lightning surges. We install heavy-duty optical fiber isolation links, gas-tube surge arrestors, and single-point earth grounding.
Why Is Stealth Video Trusted?
25+ Years of Mission-Critical Integrity
Operating continuously across Georgia since 1998 protecting government, utility, and telecommunication infrastructure.
Full NERC CIP & FIPS 140-3 Compliance
We engineer systems that satisfy federal cybersecurity, physical perimeter, and cryptographic standards.
Direct In-House Certified Systems Engineers
Zero subcontractors. Every cable run, fiber splice, and server configuration is handled by our vetted staff.
Verified Client Endorsements
"Your team has proved its commitment for being our partner. The customer service we receive on an ongoing basis and the unwavering support have proven, time and time again, that Stealth is a world class organization."
"We had Stealth Video install cameras here at Cherokee Chrysler Dodge Jeep and RAM in Canton GA, approximately 10 years ago and they have paid for themselves many times over. I must say they have excellent service, I couldn't imagine not having this system."
Critical Infrastructure Security: Engineering Comparison
Comparing high-availability critical infrastructure systems against commercial security installations:
| Evaluation Factor | Stealth Video Mission-Critical Systems | Standard Commercial Installer |
|---|---|---|
| Perimeter Intrusion Detection | Integrated FLIR thermal radar with automated slew-to-cue PTZ tracking and fiber optic fence vibration sensors | Simple optical beam sensors prone to false alarms from animals, blowing debris, and rain fogging |
| Power & Network Redundancy | N+1 redundant server clustering, dual-ring self-healing optical fiber, and 24-hour battery reserve with solar backup | Single commercial NVR with 15-minute consumer UPS that shuts down during extended power failures |
| High-Voltage Ground Isolation | Dielectric armored optical fiber and optoisolated signal converters rated for high-voltage substation switchyards | Standard copper Ethernet cables that conduct dangerous ground potential surges during substation faults |
| Regulatory Compliance Mapping | Direct engineering alignment with NERC CIP-014, FERC physical security guidelines, and NIST SP 800-82 | Generic security installations lacking formal threat-and-vulnerability risk assessments or audit documentation |
| Emergency Response SLA | Guaranteed 2-to-4 hour on-site dispatch from local Georgia technicians with spare critical hardware in inventory | Slow 24-to-48 hour response windows with backordered commercial components |
Systems & Capabilities Included
High-Availability Enterprise VMS
Deployment of Milestone XProtect Corporate and Genetec Omnicast with automated N+1 server failover.
Radiometric Thermal Heat & Fire Monitoring
Continuous surface temperature tracking across electrical switchgear, transformers, and battery banks.
Biometric Iris & Multi-Factor Access
FIPS 201 compliant biometric authentication enforcing two-man rule logic for high-security control rooms.
Shielded Single-Mode OS2 Fiber Networks
BICSI-compliant armored single-mode fiber infrastructure immune to electromagnetic interference (EMI).
Our 6-Step Engineering & Delivery Framework
Our critical infrastructure deployment lifecycle ensures continuous defense and regulatory attestation:
NERC CIP-014 Threat & Vulnerability Assessment
We conduct a comprehensive physical site vulnerability assessment, evaluating lines of sight, perimeter standoff distances, and critical asset criticality.
Fault-Tolerant Redundant System Architecture
We engineer dual-path fiber ring schematics, DC battery plant reserves, and automated failover recording topologies to ensure zero single points of failure.
Substation-Hardened Physical Installation
Our high-voltage safety certified technicians deploy dielectric fiber, rigid galvanized steel conduit, and heavy-duty grounding in compliance with IEEE standards.
Thermal Radar & Slew-to-Cue Calibration
We commission ground radar and thermal sensors, calibrating human and vehicle detection algorithms to ensure zero nuisance alarms while detecting real perimeter threats.
Regulatory Binder & Audit Attestation
We compile comprehensive security system blueprints, failover test records, and maintenance logs for submission to federal and state utility regulators.
Continuous Preventative SLA Monitoring
Routine optical sensor testing, battery discharge testing, firmware vulnerability patch management, and prioritized 24/7 emergency dispatch.
Frequently Asked Questions
How does N+1 failover protect mission-critical facilities?
If a primary recording server experiences a hardware failure, an active standby server in the cluster automatically takes over all video streams within seconds, preventing any loss of recorded evidence or live monitoring.
How do you protect security networks against electromagnetic interference (EMI)?
In high-voltage environments such as substations, we deploy 100% dielectric single-mode fiber optic cabling which is completely non-metallic, eliminating EMI distortion and lightning surge transmission.
Can the system enforce a two-person rule for critical rooms?
Yes. We configure advanced PACS logic requiring two separate authorized credential holders to badge in within 15 seconds before the high-security door lock releases.
How long has Stealth Video served critical infrastructure in Georgia?
We have provided commercial security and mission-critical integration across Metro Atlanta and Cherokee County continuously since 1998.
Contact Stealth Video Systems
Schedule a free on-site survey or request a customized written estimate for your property:
Call: 770-591-1441
Email: info@stealthvideo.com
Address: 225 Creekstone Ridge, Suite 527, Woodstock, GA 30188
Stealth Video serves property managers, commercial facilities, and enterprise clients across Marietta, Cherokee County, Cobb County, and Metro Atlanta. Free site surveys are conducted in person. Written estimates are provided at no obligation.
About Stealth Video Systems (Quick Reference)
Stealth Video Systems is an enterprise mission-critical physical security contractor based in Woodstock, GA, providing high-availability CCTV, biometric access control, and fiber optic networking across Metro Atlanta and Cherokee County since 1998. All work is performed by direct in-house, bonded technicians. Call 770-591-1441 or email info@stealthvideo.com for a free consultation.